Canon MultiPASS MP730 Quick Reference Manual

Also see for MP730 - MultiPASS Color Inkjet: User guide Quick reference guide Service manual Specifications Setup sheet

Contents

4-2 Photo printing from a memory card —Basic operation Chapter 4 Inserting/removing a memory cardInserting a memory cardFollow this procedure to insert a memory card into the machine:IMPORTANT• The machine only recognizes one memory card at a time. Do not insert memory cards into bothslots or the same slot at the same time as the machine will not recognize them.• When switching between memory cards of the same type or inserting a memory card into adifferent card slot, press [ON/OFF (1 sec.)] to turn off the power before removing the card. Onceremoved, press [ON/OFF (1 sec.)] again to turn on the power before inserting the other memorycard.• In Windows 2000, if you turn off the machine, the [Unsafe Removal of Device] screen will be displayed.In this case, click [OK]. This will not affect your machine or computer’s operation.• If you insert memory cards into both slots, the compact flash card will be recognized.1 Make sure the machine is on.• If not, press [ON/OFF (1 sec.)].2 Insert a memory card into the appropriate slot.• The indicator light A will blink when the memory card is being accessed.• Insert the Multimedia card into the same slot as the SD memory card.NOTE• If the memory card cannot be read, check that:– the memory card is inserted all the way into the card slot.– the memory card was not removed while being read.– you are using a compatible memory card.– your memory card contains photographs.512MBASmart mediaMemory stickSD memory card Compact flash