Table 1-403• The display indicates the new setting (if 10 min, indicates ‘2-3’).5) Press the Start key.• The auto power-off time is changed, and the display returns to “ ”.6) Press the AE key.• The copier returns to standby state.Reference:If you want to disable the auto power-off function, use service mode (See p. 10-109.).5. Zoom Fine-Adjustment ( )1) Hold down the AE key for 4 sec or more.• The display indicates “ ”.2) Enter ‘3’ using the keypad so that the display indicates “ ”.3) Press the Start key.• The display indicates ‘3-1’ suggesting the direction of adjustment.Table 1-404Further, the copy density indicator shows the current setting. (See Figure 1-406.)4) Press the copy density key to adjust the reproduction ratio in X direction. (See Figure1-406.)5) Press the Start key.• The reproduction ratio in X direction is fine-adjusted, and the display indicates ‘3-2’.Further, the copy density indicator shows the current setting. (See Figure 1-406.)6) Press the Density key to adjust the reproduction ratio in Y direction. (See Figure 1-406.)COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 1 GENERAL DESCRIPTION1-14Auto power-off time (min)2510153060120Settings2-12-22-32-42-52-62-7Direction of adjustmentX direction (horizontal)Y direction (vertical)Display3-13-2
