CHAPTER 9 INSTALLATIONCOPYRIGHT © 1999 CANON INC. CANON NP6512/6612/7120/7130/7130F REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)9-2II. UNPACKING AND INSTALLATIONWhen a piece of metal is brought in from a cold to warm place, droplets of water tend to formon its surface. This phenomenon is known as "condensation" and, in machines, can cause blankcopies.If the machine has been brought in from a cold place, leave it alone at least for one hour beforestarting to install it.A. Unpacking and Installation1. Setting up the MachineTake out the machine and the attachmentsfrom the shipping box, and check to make surethat none is missing:1 • Cassette• Copy tray• Power cord• ADF auxiliary tray (ADF type only)• User's Manual• Manual feed tray (for some areas only)• Language label for cassette (included withuniversal cassette)• Language label for ADF (ADF type only)• LabelRemove the packaging bag and all fixing tape.2Remove the shipping attachment [1] (gold-colored screw) from the left of the machine3You will be storing the shipping attachment[1] inside the machine in step 10.Work Checks and remarksStepShipping attachment [1]
