COPYRIGHT © 1998 CANON INC. CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON) 5–17CHAPTER 5 PICK-UP/FEEDING SYSTEM[1][3][2][4][2]Figure 5-603[5][5][6]Figure 5-604[1][2][2]Figure 5-6053. Removing the Pick-Up DriveAssembly1) Remove the registration roller assembly.(See p. 5-23.)2) Remove the E-ring [1], and slide thevertical path roll [2] in the direction of thearrow.3) Remove the bushing [3], and then verticalpath roller [2] together with the gear [4].4) Remove the four mounting screws [5],and remove the pick-up drive assembly[6].4. Removing the Pick-Up Assembly1) Remove the separation roller assembly.(See p. 5-18.)2) Remove the registration roller assembly.(See p. 5-23.)3) Disconnect the connector [1], and removethe two screws [2].
