39E Using the FullRange of FeaturesSearching and Reviewing While RecordingWhen the camcorder is in record pause mode, you can use record review toplay back the last few seconds of your recording and then returnautomatically to record pause mode. You can quickly check if a scene hasbeen recorded properly and then go on to shoot the next scene, withoutproducing any noise in the picture.1. Press and release the c (record review) button while youcheck the picture in the display.• The camcorder rewinds the tape, plays back the last few seconds, andreturns to record pause mode.Note:• Noise may appear on the screen when you play the tape backwards.REC SEARCHWhen the camcorder is in recordpause mode, you can use recordsearch to play the tape forwards orbackwards to locate the point whereyou wish to start or resumerecording. This is useful when youwish to add a new scene to apreviously used cassette. By usingrecord search, you can ensure asmooth, noise-free join between thenew scene and the old one.Record SearchRecord Review1. Press and hold the REC SEARCH + or – button on thecamcorder while you check the picture in the display.• The + button plays the recording forwards and the – button plays itbackwards.2. Release the button at the point you wish to start recording.• The camcorder returns to record pause mode.+ CAMERATAPE+ CAMERATAPE
