94EEditingOUTPUTVIDEOS(S1)-VIDEOAUDIOLRAV IN/OUT(LINEIN)RECPAUSEINDEXREC SEARCHSCREENMIX/CARDSLIDE SHOWIN/OUTRecording from a VCR, TV or Analog Camcorder (Analog Line-in)You can record a video played on your VCR or analog camcorder (for digitalcamcorders, see p. 92) or a TV program onto a tape in the OPTURA200 MC,if the TV or other device has audio/video outputs.• If an anomalous signal is sent from the TV or VCR, the images recorded onthe tape may also be anomalous (although it may not appear so on the TVimage), not recorded at all, or COPYRIGHT PROTECTED DUBBINGRESTRICTED may appear in the display.• You are unable to dub tapes recorded with the copyright protective signal.1. Connect the camcorder to the VCR.2. Prepare the device.• Set the TV/Video selector on the television to Video. For further details,see “Connections for Playback on a TV Screen” on p. 36.• Turn on the VCR. Load your recorded cassette, and put the VCR inplayback pause mode.• See your TV and VCR instruction manuals for details.3. Turn the camcorder’s POWER switch to PLAY (VCR), and movethe camcorder’s TAPE/CARD switch to TAPE.4. Load a blank cassette.PreparationsS-150 S-video CableSTV-250N Stereo Video Cable: Signal flowExample recording from a VCRYou cannot use headphones while doing analog line-in recording. If you havethe AV/headphones terminal set to headphones, it will automatically switchto AV for analog line-in recording. PHONES disappears from the display.
