130EAdditionalInformationDANGER!Treat the battery pack with care.• Keep it away from fire (or it might explode).• Do not expose the battery pack to temperatures greater than 140°F (60°C).Do not leave it near a heater, or inside a car in hot weather, for example.• Do not try to disassemble or modify it.• Do not drop or knock it.• Do not get it wet.WARNING!• The battery used in this device may present a fire or chemical burn hazard ifmistreated. Do not recharge, disassemble, heat above 212°F (100°C) orincinerate.• Replace the battery with a CR1616, made by one of the following companies:Panasonic, Hitachi Maxell, Sony, Toshiba, Varta, Renata. Use of anotherbattery may present a risk of fire or explosion.Installing the backup batteryPull out the backup battery holder from thebase of the camcorder, and insert the CR1616lithium battery with the + side facingoutwards. Click the holder back into place.This backup battery allows the camcorder toremember the date and time and other settingswhen main power source is removed. It has alife span of about a year.When it needs replacing (or if it has not beeninstalled), the y mark flashes in the display.Make sure to attach a power source to thecamcorder first, so it will remember your chosen settings when you change thebattery.Cautions:• Do not pick up the battery using tweezers or other metal tools — this will causea short circuit.• Wipe the battery with a clean, dry cloth to ensure proper contact.• Keep the battery pack out of reach of children — if it is swallowed, contact aphysician immediately, as the battery case may break down and the batteryfluids damage the stomach and intestines.• Do not disassemble, heat or immerse the battery in water, to avoid the risk ofexplosion.
