123Direct PrintingE❍ If continues to flash (for more than 1 minute) or if , ordoes not appear, the camcorder is not correctly connected to the printer. In suchcase, disconnect the cable from camcorder and printer, turn off camcorder andprinter, turn both back on and reconnect the camcorder to the printer.With the OPTURA500, the USB connection mode may not be correctly set in themenu. Make sure that [ CONNECT] is set to [STANDARD].❍ Do not connect the camcorder to a printer when the camcorder is set to a modeother than the CARD PLAY mode.❍ Do not press the CARD STILL/MOVIE button while a printer isconnected to the camcorder.❍ Refer to the instruction manual of each printer for information on whichinterface cable to use with the camcorder.The Canon CP-Printers CP-10 and CP-100 are supplied with two directinterface cables. Use the cable with the USB logo on the connector (DIF-100).❍ We recommend powering the camcorder from a household power source.❍ Refer also to the instruction manual of the respective printer.❍ The print setting menu may differ slightly depending on the connected printer.Printing with the (Print/Share) ButtonYou can print an image without changing the settings by simply pressing the(print/share) button.1. Select the still image you wish to print with theCARD +/– button.2. Press the (print/share) button.• Printing starts. The button flashes and glows steadilywhen printing is complete.• If you wish to continue printing, select another still image withthe CARD +/– button.Printing after Selecting the Print SettingsYou can select the number of copies and other settings for printing. The settingoptions vary depending on your printer model.1. Press the SET dial.• The print setting menu appears.• Depending on the printer, the message “BUSY.” may appearbefore the camcorder displays the print setting menu.CARD PLAYCARD CAMERAPLAY (VCR)CAMERACARD
