91EditingETransferring Video Recordings to a ComputerTransferring Using a DV CableYou can transfer recordings to a computer equipped with a IEEE1394 (DV) terminal orIEEE1394 capture board. Use the editing software supplied with yourcomputer/capture board to transfer video recording from tape to computer. Refer tothe instruction manual of the software. A driver is preinstalled on Windows operatingsystems later than Windows 98 Second Edition and Mac operating systems later thanMac OS 9, and will be installed automatically.❍ Operation may not work correctly depending on the software and thespecifications/settings of your computer.❍ If the computer freezes while you have connected the camcorder, disconnectand reconnect the DV cable. If the problem persists, disconnect the interfacecable, turn off camcorder and computer, turn camcorder and computer backon and reconnect them.❍ Make sure that camcorder and computer are not connected with a USB cablebefore connecting the camcorder to the computer using the DV cable.Otherwise, the computer may not operate properly.❍ We recommend powering the camcorder from a household power sourcewhile it is connected to the computer.❍ Refer also to the instruction manual of the computer.IEEE1394 (DV) terminalCommercially available DV cable 6-pin4-pin
