Canon Optura Instruction Manual

Also see for Optura: Instruction manual

Contents

39E Using the FullRange of FeaturesTo use the conversion program, put the camera in record pause mode and turn theprogram selector to .You can also alter the strength and tint of the colors, plus mask the edges of thepicture when using the Film Adapter (FP-100).1. Display TINT, COLOR and MASK. options by moving thecontroller up or down.2. Adjust the level or choose the type of masking by pressing thecontroller up or down to choose the option and then left/right tochange its setting.Tint:• There are 15 possible settings. When converting a negative image, aroundsetting 5 gives the converted image the most reddish tint, around 10 gives themost bluish tint.Color:• The settings for the overall strength of the colors varies from +5 to –5. Setting–5 gives a black and white image. Use this when converting black & whitenegatives.• When you adjust the tint or color, appears in the display.• When you select a different recording program or switch the power off , the tintand color will return to a level set automatically by the camcorder and thewill disappear from the display.• Also, when you change the film you need to return the tint and color to theautomatic levels in the same way.Masking:• There are 6 masking settings, three portrait(vertical) maskings and 3 landscape(horizontal) maskings.• and correspond to the AdvancedPhoto System, the others to 35 mm film.• The options disappear from the frame afew seconds after your last operation.Note:• The camera mode is set to progressive scan by the camera; you cannot selectnormal mode.22MMNo displayNo display1.MA SK3.MA SK2.MA SK1.MA SK 2.MA SK3.MA SK