Canon Optura Xi Instruction Manual

Also see for optura Xi: Instruction manual Brochure Instruction manual

Changing the Remote Sensor Mode []Two remote sensor modes and an off setting are available to prevent interferencefrom other Canon wireless controllers being used nearby.Turning the R_mate SenSQ_ OffMENU [SYSTEM([_ 43) WL . REMOTE .... (0_ 1Open the menu and select [SYSTEM]. Select [WLREMOTE], set it to [OFF ((_] and close the menu."((_" appears.1. On the camcorder, open the menu and select[SYSTEM]. Select [WL REMOTE], set it to [(l_ 2] andclose the menu.The selected mode appears for 4 seconds.2. On the wireless controller, press and hold theREMOTE SET button. Press the ZOOM T button formode 2. Keep the button pressed for over 2 seconds.If you have set the camcorder to mode 1, press the ZOOM TiNbutton for mode 1.0 The wireless controller returns to mode 1 when youreplace the batteries. Change the mode if necessary.0 Make sure that camcorder and wireless controller are set to the same mode.Display the camcorder's mode by pressing any button on the wireless controller(except of the REMOTESETbutton) and set the wireless controller's mode tothe same mode. Change the batteries if the wireless controller still does notwork.51