Canon PIXMA MP190 Series Install Manual

Also see for PIXMA MP190: Supplementary guide Manual Quick start guide Brochure Quick start guide

Contents

software installation

Start HereEasy Setup Instructionsa Unpack the Machine.Confirm the included items referring to the illustration printed on the lid of thepacking box or “Included Items” in the Quick Start Guide.A USB cable is necessary to connect the machine with your computer.Remove all the shipping tapes and protective material on the outside of themachine.ImportantWhen moving the machine, carry the machine at both ends as shown below. Donot lift the machine by grasping the Paper Support Extension.b Open the Paper Output Tray, then take out the power cord andthe Black and Color FINE Cartridges from inside the machine.c Lift the Scanning Unit (Cover), and pull the Scanning UnitSupport down into place.Scanning Unit (Cover)d Remove the protective material on the right side.Protective MaterialCautionBefore turning on the machine, remove all of the shipping tapes.1 Prepare the Machinee Lift the Scanning Unit (Cover) slightly to set the Scanning UnitSupport back to its original position, and then gently close theScanning Unit (Cover).f Plug the power cord in the back of the machine and connect theother end to the wall outlet.Power Cord Document CoverImportantMake sure that the Document Cover is closed.Do NOT connect the USB cable at this stage.g Press the ON button to turn on the machine. The machine willinitialize. Wait until the Power lamp stops flashing and remainslit green.h Lift the Scanning Unit (Cover), and pull the Scanning UnitSupport down into place. Wait until the FINE Cartridge Holderhas moved to the left automatically and stop.Scanning Unit (Cover)FINE Cartridge HolderCautionDo not touch internal parts other than the FINE Cartridge Holder.••2 Install the FINE CartridgesNoteFor the FINE Cartridges compatible with this machine, refer to the back cover of theQuick Start Guide.a Remove the Black FINE Cartridge from its box.b Remove the protective tape gently.Protective TapePrint Head NozzlesElectrical ContactsImportantDo not touch the electrical contacts or Print Head Nozzles on a FINE Cartridge.The machine may not print out properly if you touch it.Do not drop or shake FINE Cartridges as this may cause the ink to leak out andstain your clothes and hands.Do not reattach the protective tape once you have removed it.Be careful not to stain your hands or surrounding work area with ink on theremoved protective tape.c Insert the Black FINE Cartridge slightly slanted into the left slotB .ImportantMake sure the machine is turned on and the Power lamp lights green.Make sure the FINE Cartridge Holder has moved to the left.••••••d Push up the FINE Cartridge until it clicks into place.ImportantFor correct machine operation, make sure the FINE Cartridge is securely in-serted.If the Scanning Unit (Cover) is left open for more than 10 minutes, the FINECartridge Holder moves to the right side. Close and reopen the Scanning Unit(Cover) to return the holder to the left.Clicke Repeat the procedure for the Color FINE Cartridge, inserting itinto the right slot C .Correctly InstalledFINE Cartridgesf Lift the Scanning Unit (Cover) slightly to set the Scanning UnitSupport back to its original position, and then gently close theScanning Unit (Cover).ImportantOnce you have installed the FINE Cartridges, the LED will flash green. Wait untilthe LED stops flashing and displays 1. It takes about one to two minutes.Alarm LampNoteIf the Alarm lamp lights and an error code is displayed on the LED, refer to “An ErrorCode Is Displayed on the LED” in “Troubleshooting” of the Quick Start Guide.Hardware setup is complete.••Photo All-In-OneImportantWhen cleaning the exterior of the machine, use a soft cloth to wipe it gently. For details, refer to “Cleaning Your Machine” in the Quick Start Guide.QT5-1488-V01 XXXXXXXX © CANON INC. 2008 PRINTED IN VIETNAM

/ 2

Related manuals for Canon PIXMA MP190