Canon PIXMA MP190 Series Install Manual

Also see for PIXMA MP190: Supplementary guide Manual Quick start guide Brochure Quick start guide

Contents

software installation

3 Software Installation 3 Software InstallationNoteThe screens below refer to Windows Vista operating system Ultimate Edition(hereafter referred to as “Windows Vista”) installation.Screens may vary depending on the operating system you are using.Log into a user account with the administrator privilege.Do not switch users during the installation process.Quit all running applications before installation.A message asking for your confirmation to restart your computer may appearduring the installation process. If this message is displayed, follow the on-screeninstructions and click OK.The installation resumes from where it left off when your computer has been restarted.While restarting, do not remove the Setup CD-ROM.a Be sure to TURN THE MACHINE OFF before continuing.(1) Press the ON button.(2) Make sure that the Power lamp stops flashing.b Turn the computer on and start Windows®.ImportantIf the Found New Hardware or Found New Hardware Wizard screen appearsautomatically, remove the USB cable connected to your computer. Click Cancelto quit the screen. In Windows Vista, the screen may close automatically whenthe USB cable is unplugged. Then turn off the machine and proceed from stepc to install the software.c Insert the Setup CD-ROM. The setup program should runautomatically.In Windows Vista, go to Step d. In Windows XP and Windows 2000, go toStep f.NoteIf installation does not start automatically, double-click the CD-ROM icon orMSETUP4.EXE contained on the Setup CD-ROM.d If the AutoPlay screen appears, click Run Msetup4.exe.e If the User Account Control screen appears, click Continue.If the same screen reappears in subsequent steps, clickContinue.f When the main menu appears, click Easy Install.The MP Drivers, On-screen Manuals, and application software are installedautomatically.NoteIf you want to select particular items to install, click Custom Install and follow the on-screen instructions to proceed the installation.•••••g When the list of applications to install appears, confirm thecontents, click Install.NoteMove the cursor over items to display explanations of each application.h When the License Agreement is displayed, read it carefullyand click Yes. Two License Agreement screens may appear.The software installation starts.i When the Printer Connection screen appears, connectone end of the USB cable to the computer, the other to themachine, then TURN THE MACHINE ON. The MP Drivers willbegin identifying the printer port being used.ImportantIf you cannot go to the next procedure after three minutes, refer to “Trouble-shooting” instructions in the Quick Start Guide.USB To Computer→j When the Print Head Alignment Recommended screenappears, click Next.k When the Setup Complete screen appears, click Next.l When the User Registration screen appears, click Next.NoteTo register later, click Cancel and go to Step m. After software installation is complete,double-click on the desktop.Follow on-screen instructions to register your product. You will need yourproduct serial number, which is located on the inside of the machine.Serial Numberm When the Extended Survey Program screen appears,confirm the message. We would appreciate it if you would takepart in this program regarding the use of Canon printers. If youcan agree, click Agree.If Do not agree is clicked, the Extended Survey Program will not beinstalled but you can use the machine normally.n When the Installation completed successfully screenappears, click Exit. Remove the Setup CD-ROM after clickingExit.If Restart is displayed, make sure that the Restart the system now(recommended) check box is selected, then click Restart.Remove the Setup CD-ROM after restarting the computer.NoteKeep the Setup CD-ROM in a safe place in case you need to reinstall the software.Software installation is now complete.NoteSince Mac ® OS 9, Mac OS X Classic environments, or Mac OS X v.10.3.8 or earlierare not supported, do not connect the machine to these. Use Mac OS X v.10.3.9 orlater.The screens below refer to Mac OS X v.10.4.x installation. Screens may varydepending on the operating system you are using.Log on as an Administrator.Quit all running applications before installation.a Connect one end of the USB cable to the computer and theother to the machine.NoteMake sure the machine is turned on.USBb Turn on your Mac and insert the Setup CD-ROM.NoteIf the CD-ROM folder does not open automatically, double-click the CD-ROM iconon the desktop.c Double-click the Setup icon.d When the Authenticate screen appears, enter youradministrator name and password. Click OK.If you do not know your administrator name or password, click, then follow the on-screen instructions.e When the main menu appears, click Easy Install.The MP Drivers, On-screen Manuals, and application software are installedautomatically.NoteIf you want to select particular items to install, click Custom Install and follow the on-screen instructions to proceed the installation.f When the list of applications to install appears, confirm thecontents, then click Install.NoteMove the cursor over items to display explanations of each application.g Read the License Agreement carefully and click Yes.The software installation starts.h When the Print Head Alignment Recommended screenappears, click Next.i When the Setup Complete screen appears, click Next.••••j When the User Registration screen appears, click Next.NoteTo register later, click Cancel and go to Step k. After software installation is complete,double-click on the desktop.Follow on-screen instructions to register your product. You will need yourproduct serial number, which is located on the inside of the machine.Serial Numberk When the Installation completed successfully screenappears, click Restart.Remove the Setup CD-ROM after restarting the computer.The system is restarted automatically.NoteKeep the Setup CD-ROM in a safe place in case you need to reinstall the software.When using Mac OS X v.10.3.9:Restarting the computer while connected to the machine may cause themachine not to be detected. To resolve this, either unplug the USB cablethen plug it back in again, or turn the machine off then back on again.NoteWhen using Mac OS X v.10.3.9, before using the Operation Panel on the machine tosave originals scanned from the Platen Glass to the computer, it is necessary to selectMP Navigator EX as the launch application on Image Capture under Applications.For details, refer to “Scanning Images” in the User’s Guide on-screen manual.Software installation is now complete.Microsoft is a registered trademark of Microsoft Corporation. Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries. Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries. Macintosh and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.

/ 2

Related manuals for Canon PIXMA MP190