Canon PIXMA MP560 Series Getting Started

Also see for MP560 - PIXMA Color Inkjet: User manual Function guide Network Setup Getting started Network Setup

0 Wireless ConnectionWireless SetupFor details on how to check the following information, refer to the manual of your access point or router,or contact its manufacturer.Check the Information for Wireless Connection■The following information is required to connect to your access point or router.Check your access point or router for the following information, then write it down.Access Point Name/Network Name:Network Key:* Also referred to as SSID.* Also referred to as encryption key, WEP key or WPA/WPA2 passphrase, Pre-Shared key.If your access point or routersupports WPS (Wi-Fi ProtectedSetup):□If you are using Windows Vista operatingsystem and have a USB flash drive, youcan configure wireless connection settingsby using the WCN (Windows ConnectNow) function as well. For details, referto "Wireless Setup Using WCN (WindowsConnect Now)" in "Reference Information"on page 56.•A wireless connection can be set up easilywithout checking the information to theleft. Go to "Wireless Setup Using WPS(Wi-Fi Protected Setup)" on page 24.An identifier to identify the specific access point.A password required to set to prevent unauthorized access to communication.You can retrieve your network key by using the Canon PIXMA Wireless Setup Assistant or the instructionswhich can be downloaded from the Canon support webpage (www.usa.canon.com/downloadlibrary).If you are unable to retrieve the network key or other settings, refer to the manual of your access point orrouter, or contact its manufacturer.