22 Before Printing(3) Select the paper source.Before printing, confirm that the location where you have loaded paper is selected as thepaper source. Press the OK button to change the paper source.(4) Specify the page size.Credit card, A5, B5, A4, 8.5" x 11" (215 x 279), 5" x 7" (127 x 177.8), 4" x 6" (101.6 x152.4)(5) Specify the media type.Glossy Photo Paper, Matte Photo Paper, Photo Plus Glossy, Plain paper, Photo PaperPro(6) Adjust print quality according to the original.Fast (speed-priority), Standard, High(quality-priority)ImportantWhile Auto is selected, you can not change the intensity by using the Easy-Scroll Wheel.Press the Function button (f2/Switch auto/man) to enable manual intensity settings againand then specify the intensity. See “Function Buttons” on page 3.ImportantCredit card can be selected when the Auto Sheet Feeder is selected as the paper source.NoteSome of these options are not available depending on the country of purchase.Notez Fast (speed-priority) can be selected when Plain paper is selected as the media type.z If you used Fast (speed-priority) with media type set to Plain paper and the quality is notas good as expected, select Standard or High(quality-priority) and try copying again.z Select High(quality-priority) to copy in grayscale. Grayscale renders tones in a range ofgrays instead of black or white.
