Canon PIXMA MP600 Quick Start Manual

Also see for PIXMA MP600: Supplementary guide Brochure Start here Quick start guide Quick start guide

Contents

41Printing Photographs Directly from a Compliant Device Printing Photographs Directly from a PictBridge Compliant DeviceWhen operating the device, be sure to follow the instructions given in the instruction manual ofyour PictBridge compliant device. This section describes the page size, media type, layout,image optimization modes, and date printing mode that can be set on a PictBridge compliantdevice connected to the machine.z Confirming or Changing PictBridge Print Settings from Your CameraTo change the page size or media type, operate the device to select the PictBridge print setupmode and confirm or change the settings.About the Settings Explained BelowSome setting items explained below may not be available on some devices. In this case, theDefault setting explained below is applied for the setting item.* In the following description, names of settings items are given according to those used inCanon-brand PictBridge compliant devices. Setting item names may be different dependingon the brand or model of your device.The settings below can be changed in the PictBridge settings screen on the machine when aPictBridge compliant device is connected. However, changes can be made in the PictBridgesettings screen on the machine only when the corresponding items below are in the Defaultsetting items (the setting to follow that of the machine) on the PictBridge compliant device.See “Confirming or Changing PictBridge Print Settings on the Machine” on page 44.z Printable Image Data FormatThis machine prints images taken with a DCF® (Design rule for Camera File system)-compatible digital camera*, as well as PNG files.* Exif2.21 compliantPictBridge compliantdevice setting itemsMachine setting on the Print Setting screenPaper size: Default You can change the following settings on the PictBridgesettings screen:Page size, Media type, Bordered/BorderlessFor the setting items, see “Setting items” on page 44.Paper type: DefaultLayout: DefaultImage optimize: Default You can change the following settings on the PictBridgesettings screen:Photo opt.pro, Vivid photo, Face brightener, Noisereduction, Image optimizer, Red eye correc., Brightness,Contrast, Color hue, EffectsFor the setting items, see “Setting items” on page 44.