1 2 34 56Serial Number* * * * * * *712seriesEasy Setup Instructions For Apple AirPortWireless NetworksThese instructions are for setting up your PIXMA machine on an Apple AirPort wireless network in a Mac OS X environment. For all other environments, including USBconnections, wired networks, non-AirPort wireless networks, and all Windows installations, please use the Getting Started Guide. Also for setting up additional computers onyour network to access the machine, refer to the Getting Started Guide.Hardware SetupUnpack the machine and prepare the hardware for use by following chapters 1 to 4 of the Getting Started Guide.Driver/Software InstallTurn on the computer, then insert the SetupCD-ROM into the CD-ROM drive.Connect one end of the USB cable to the computerand the other to the machine.Make sure the machine is turned on.Double-click the Setup icon.If the CD-ROM folder does not open automatically,double-click the CANON_IJ icon on the desktop.Enter your administrator name and password.Click OK.If you do not know your administrator name or password,click Help, then follow the on-screen instructions.Click Easy Install.The drivers, application software, and on-screenmanuals are installed automatically.Click Restart.When the computer restarts, Canon IJ Network Tool startsautomatically.Click Restart to restart the computer.After restarting the computer, remove the Setup CD-ROMand keep it in a safe place.Follow on-screen instructions.If the registration screen appears, follow the on-screeninstructions to register your product. You will need yourproduct serial number which is located on the packaging,or, on the inside lower part of the machine.•Before starting, please locate and write down the your network name and password. Since Apple recommends using the WPA/WPA2 encryption method for AirPort networks,these instructions are for configuring the machine on WPA/WPA2 encrypted networks.Network password (if applicable):Network Name (also called SSID):