Canon PIXMA iP4200 Series Quick Start Manual

Also see for iP4200 - PIXMA Photo Printer: Supplementary guide Installation instruction Easy Setup instructions Service manual Service manual

Contents

Troubleshooting82*1 To resume printing, you can press the RESUME/CANCEL button on the printer instead of selecting Continue.*2 The waste ink absorber absorbs ink used during cleaning, for example. If this message appears, you will need to call forservicing to replace the absorber and to check the printer for proper operation.Low ink level It is about time to replace theink tank with a new one Slow flashing (at about three second interval in red) of an inktank lamp indicates that ink in this tank is low. Prepare a newink tank.Select Continue *1 in the display on your camera to resumeprinting.No ink The ink tank may not beinstalled properly (PrinterALARM lamp flashes orangefour times/Ink tank lamp isoff)Install the appropriate ink tank.The ink has run out (PrinterALARM lamp flashes orangefour times/Ink tank lampflashes fast (at about onesecond interval))Replace the ink tank, and close the Top Cover.If printing is in progress and you want to continue printing,select Continue *1 in the display on your camera with the inktank installed. Then printing can continue under the ink outcondition. Replace the empty ink tank immediately after theprinting. The printer may be damaged if printing is continuedunder the ink out condition.If multiple ink tank lamps are flashing, check howfast they flash. Fast flashing (at about one secondinterval) indicates the ink is empty. Slow flashing(at about three second interval) indicates ink islow. For details on different flashing speeds, see“Getting the Ink Level Information” on page 38.Some ink tanks are notinstalled in place, or morethan one ink tanks of thesame color are installed(Printer ALARM lamp flashesorange seven times/Ink tanklamp flashes fast (at aboutone second interval))Confirm that the ink tanks are installed in the appropriatepositions.See “Replacing an Ink Tank” on page 37.The ink tank may not becompatible with this printer(Printer ALARM lamp flashesorange fourteen times/Inktank lamp is off)Install the appropriate ink tank.Ink Error/No ink An ink tank that was onceempty is installed (PrinterALARM lamp flashes orangethirteen times)Replace the ink tank.Printing under the situation may damage the Print Head. Canonshall not be liable for any printer malfunction or damage causedby refilled ink tanks.If you want to continue printing with the refilled ink tankinstalled, press and hold the RESUME/CANCEL button for atleast five seconds, and then release it. Using refilled ink tanksare memorized.* This operation will release the function for detecting theremaining ink level.Hardware Error/No ink Ink tank errors have occurred(Printer ALARM lamp flashesorange fifteen times)Replace the ink tank.Printer error An error requiring servicingmight have occurred (PrinterPOWER lamp flashes greenand ALARM lamp flashesorange alternately)Disconnect the cable between the printer and the camera, turnoff the printer, and unplug the power cord of the printer fromthe power supply. After a while, plug the power cord of theprinter back in, turn on the printer, and then reconnect thecamera to the printer.If the same error occurs, contact the Customer Care Center.Camera Error Message Possible Cause Try This