Canon PIXMA iP5200R Setup Manual

Also see for iP5200R - PIXMA Color Inkjet Printer: Supplementary guide Quick start guide Service manual Brochure & specs Service manual

Contents

36 When an access point is detected automaticallyThe access point is detected automatically if nooperation is required for connecting to the access point.Setup proceeds to step 6. If the Access Points dialog box is displayed1. Select the target access point in the Access Pointsdialog box.If the target access point is not displayed in the list,see “The target access point is not detected” in“Troubleshooting” on page 52.2. Confirm the Encryption column of the selectedaccess point.If the Encryption column is blank, click Connect.If WEP or WPA is displayed in the Encryptioncolumn, the access point is configured to use theencryption.Enter the Network Password (WEP key orPassphrase) set to the access point and click Connect.For details, see “About Network Key (Windows)/Network Password (Macintosh)” in“Troubleshooting” on page 53. If An access point could not be detected is displayedClick OK to display Access Points dialog box. Fordetails, see “The target access point is not detected” in“Troubleshooting” on page 52.6 Setup automatically detects the printer.The iP5200R connected with a USB cable is detectedautomatically. When the printer is detected automaticallyThe printer is detected automatically if no operation isrequired for connecting to the printer. Setup proceeds tostep 7. If the Printer IP Address Setup dialog box is displayedIf the printer is not detected automatically, the PrinterIP Address Setup dialog box is displayed. ClickConnect to connect to the printer. If the printer is stillnot detected, see “The Set Printer IP Address / PrinterIP Address Setup dialog box is displayed duringsetup” in “Troubleshooting” on page 58.The printer may communicate with other accesspoints used in the vicinity.