SizeAdjusts the size of the bitmap file to be used as a stamp.Moving the slider to the right increases the size, moving the slider to the left decreases the size.Transparent white areaSpecifies whether to make white-filled areas of the bitmap transparent.Check this check box to make white-filled areas of the bitmap transparent.Note• Click Defaults to set Stamp Type to text, Stamp Text to blank, TrueType Font to Arial, Style toRegular, Size to 36 points, Outline unchecked, and Color to gray with the RGB values (192, 192,192).Placement TabThe Placement tab allows you to set the position where the stamp is to be printed.Preview WindowShows the status of the stamp configured in each tab.PositionSpecifies the stamp position on the page.Selecting Custom from the list allows you to enter values for the X-Position and Y-Positioncoordinates directly.OrientationSpecifies the angle of rotation for the stamp. The angle can be set by entering the number ofdegrees.Negative values rotate the stamp clockwise.Note• Orientation is enabled only when Text or Date/Time/User Name is selected for Stamp Typeon the Stamp tab.Note• Click Defaults to set the stamp position to Center and the orientation to 0.Save settings TabThe Save settings tab allows you to register a new stamp or delete an unnecessary stamp.TitleEnter the title to save the stamp you created.Up to 64 characters can be entered.Note• Spaces, tabs, and returns cannot be entered at the beginning or end of a title.StampsShows a list of saved stamp titles.Specify a title to display the corresponding stamp in Title.Save/Save overwriteSaves the stamp.Enter a title in Title, and then click this button.234
