Canon Pixma MG6821 Online Manual

Also see for MG6800 Series: Getting started Online manual Getting started Getting started

FirewallA firewall is a function of the security software installed in the computer or operation system for computer,and is a system that is designed to prevent unauthorized access to a network.Precautions When Firewall Function is Enabled• A firewall function may limit communications between a printer and a computer. This may disableprinter setup and communications.• During the printer setup, you may be prompted to enable or disable communications, depending onthe firewall function of the security software or operation system. If so, choose to enablecommunications.• When using IJ Network Tool, you may be prompted to enable or disable communications, dependingon the firewall function of the security software. If so, choose to enable communications.• If you cannot set up the printer, temporarily disable the firewall function of the security software oroperation system.Important• If you disabled the firewall function, disconnect your network from the Internet.• Some applications (like the network configuration software) override firewall settings. Check theapplication's settings beforehand.• If the printer you use is set to Get IP address automatically, the IP address changes every time theprinter connects to the network. This may disable printer setup and communications, depending onthe firewall settings. In this case, either change the firewall settings or assign a fixed IP address to theprinter. An IP address can be set using IJ Network Tool.Changing Settings in Wireless LAN SheetChanging Settings in Wired LAN SheetWhen assigning a fixed IP address to the printer, you will need to specify an IP address with which thecomputer can communicate.Note• For the operation system firewall settings or the security software firewall settings, refer to theinstruction manual of the computer or software, or contact its manufacturer.359