Canon Pixma MP495 Series On-screen Manual

Also see for PIXMA MP495 Series: Getting started Manual Manual Network Setup Installation guide

Advanced Guide > Scanning > Scanning with Using the Operation Panel of the Machine > Forwarding Scanned Data tothe Computer Using the Operation Panel of the MachineU051Forwarding Scanned Data to the Computer Using the OperationPanel of the MachineYou can forward scanned data to the computer using the Operation Panel of the machine.The machine detects the type of the originals loaded on the Platen Glass automatically and the image isforwarded to the computer in the optimized size and resolution.ImportantScanning via a network is not available.Load originals properly according to their type; otherwise, some originals may not be scannedproperly.Refer to Placing Documents for how to load the original on the Platen Glass.The following items can be scanned:Photos, postcards, visiting cards, magazines, newspapers, documents, BD/DVD/CDsThe following items cannot be scanned properly.A4 sized photosDocuments smaller than 5 inches x 7 inches (127 mm x 178 mm) such as a paperback with itsbackbone cut offOriginals on thin white paperLong and narrow originals such as panoramic photographsBefore forwarding scanned data to the computer, confirm the following:The necessary application software (MP Drivers and MP Navigator EX)is installed.If the application software (MP Drivers and MP Navigator EX) is not yet installed, insert the Setup CD-ROM into the computer's disc drive, then perform Custom Install and select MP Drivers and MPNavigator EX to install.The machine is connected to a computer correctly.Make sure that the machine is connected to the computer correctly.Do not plug in or unplug the USB cable when scanning images with the machine, or when thecomputer is in the sleep or standby mode.The destination and the file name are specified in MP Navigator EX.You can specify the destination and the file name in MP Navigator EX. For details on how to performsettings or the initial settings, refer to Scanner Button Settings Tab (Save to PC) .NoteWhen scanning with using the Operation Panel of the machine, the document type isautomatically detected and the settings in document size and resolution are automatically set.1. Make sure that the machine is turned on.2. Load the original on the Platen Glass.NoteRefer to Placing Documents for how to load the original on the Platen Glass.Page 337 of 759 pagesForwarding Scanned Data to the Computer Using the Operation Panel of the ...