Canon Pixma MP495 Series On-screen Manual

Also see for PIXMA MP495 Series: Getting started Manual Manual Network Setup Installation guide

E, 1, 6(LED display)The ink has run out. The ink has run out.Replace the ink cartridge and closethe Scanning Unit (Cover).If printing is in progress and you wantto continue printing, press themachine's Stop (Reset) button for atleast 5 seconds with the ink cartridgeinstalled. Then printing can continueunder the ink out condition.The function for detecting theremaining ink level will be disabled.Replace the empty ink cartridgeimmediately after the printing. Theresulting print quality is notsatisfactory, if printing is continuedunder the ink out condition.E, 2, 0E, 2, 1E, 2, 2E, 2, 3E, 2, 4(LED display)An error regarding networkhas occurred.Refer to your setup manual or theNetwork Setup Troubleshooting andtake the appropriate action.E, 3, 0(LED display)The size of the originalcannot be correctlydetected or the documentis too small when the Fit-to-Page copying is selected.Make sure that the original meetsthe requirements and is correctlyloaded on the Platen Glass.Check the position and directionof the original loaded on thePlaten Glass.E, 3, 1(LED display)The machine is notconnected with thecomputer.Connect the machine and thecomputer with a USB cable or over awireless LAN.E, 5, 0 Scanning the print headalignment sheet has failed.Press the Stop/Reset button todismiss the error, then take theactions described below.Make sure that the print headalignment sheet is set in thecorrect position and orientationon the Platen Glass.Page 616 of 759 pagesAn Error Code Is Displayed on the LED