BrightnessSelect the brightness of printed images.You cannot change the levels of pure white and black. You can change the contrast of the colorsbetween white and black.IntensitySelect this method to adjust the overall density of your print.To increase the overall intensity, drag the slider to the right. To decrease the overall intensity, drag theslider to the left.You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.ContrastThe Contrast function changes the differences between light and dark in images during printing.To make the differences between the light and dark portions of images greater and more distinct,increase the contrast. On the other hand, to make the differences between the light and dark portions ofimages smaller and less distinct, reduce the contrast.You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.Important• When the Grayscale Printing check box is checked for Quality & Media, the color balance (Cyan,Magenta, Yellow) appear grayed out and are unavailable.• If you select ColorSync for Color Matching, then the color balance (Cyan, Magenta, Yellow),Brightness, Intensity, and Contrast appear grayed out and are unavailable.Related TopicsSpecifying Color CorrectionAdjusting Color BalanceAdjusting BrightnessAdjusting IntensityAdjusting Contrast282
