87123456789CoverPreliminary Notes andLegal InformationContents: BasicOperationsAdvanced GuideCamera BasicsSmart AutoModeOther ShootingModesPlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexBasic GuideP ModeConnecting to Another CameraConnect two cameras via Wi-Fi and send images between them as follows.• Only Canon-brand cameras equipped with a Wi-Fi function can be connectedto wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannotbe connected to if they do not have a Wi-Fi function. You cannot connect toPowerShot SD430 DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESScameras with this camera.1 Access the Wi-Fi menu.zz Press the <o> button.2 Choose a camera.zz Press the <o><p><q><r> buttons tochoose [4], and then press the <m>button.3 Choose [Add a Device].zz Press the <o><p> buttons to choose[Add a Device], and then press the <m>button.zz Follow steps 1 – 3 on the target camera.XX Camera connection information will beadded when [Start connection on targetcamera] is displayed on both camerascreens.XX When the target camera has been addedsuccessfully, the image transfer screenwill be displayed. Proceed to “SendingImages” (=95).• After you have accessed the Wi-Fi menu once, you can access it again bypressing the <o> button. The recent target device is listed first, so you caneasily connect again by pressing the <o><p> buttons to choose it. To adda new device, display the device selection screen by pressing the <q><r>buttons, and then configure the setting. If you prefer not to display recenttarget devices, press the <n> button, and on the [3] tab, choose [Wi-FiSettings] ► [Target History] ► [Off].• To add multiple cameras, repeat the above procedures starting from step 1.• Once a camera is added, the camera nickname will be displayed on the screenin step 3. To connect to a camera again, simply choose the camera nicknamefrom the list.COPY
