92123456789CoverPreliminary Notes andLegal InformationContents: BasicOperationsAdvanced GuideCamera BasicsSmart AutoModeOther ShootingModesPlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexBasic GuideP ModeConnecting to Access Points in the List1 View the listed access points.zz View the listed networks (access points)as described in steps 1 – 3 of “Adding aComputer” (=90).2 Choose an access point.zz Press the <o><p> buttons to choose anetwork (access point), and then pressthe <m> button.3 Enter the access point’sencryption key.zz Press the <m> button to access thekeyboard, and then enter the encryptionkey (=88).zz Press the <o><p> buttons to choose[Next], and then press the <m> button.4 Choose [Auto].zz Press the <o><p> buttons to choose[Auto], and then press the <m> button.XX A list of other devices connected to theaccess point will appear in the [Select aDevice] screen.5 Choose a computer to connectto.zz Choose the computer to connect to,following steps 7 – 8 in “Adding aComputer” (=91). The computer isnow added to the list.• For information on the access point’s encryption key, refer to the body of theaccess point or its user manual.• Up to 16 access points will be displayed. If no access points are detected,choose [Manual Settings] in step 2 to manually set an access point. Followon-screen instructions and enter an SSID, security settings, and an encryptionkey.• When you use an access point that you have already connected to forconnecting to another device, [*] is displayed for the encryption key in step 3.To use the same encryption key, press the <q><r> buttons to choose [Next],and then press the <m> button.• To add multiple computers, repeat the above procedures starting from step 1.COPY