Canon PowerShot ELPH 180 User Manual

Also see for IXUS 175: Getting started

Contents

12Before UseBasic GuideAdvanced GuideCamera BasicsAuto ModeOther ShootingModesP ModePlayback ModeSetting MenuAccessoriesAppendixIndexBefore UseBasic GuideAdvanced GuideCamera BasicsAuto ModeOther ShootingModesP ModePlayback ModeSetting MenuAccessoriesAppendixIndex• To protect the battery pack and keep it in optimal condition, do notcharge it continuously for more than 24 hours.• For battery chargers that use a power cord, do not attach thecharger or cord to other objects. Doing so could result in malfunctionor damage to the product.• For details on charging time and the number of shots and recording timepossible with a fully charged battery pack, see “Number of Shots/RecordingTime, Playback Time” (=107).• Charged battery packs gradually lose their charge, even when they are notused. Charge the battery pack on (or immediately before) the day of use.• The charger can be used in areas with 100 – 240 V AC power (50/60 Hz). Forpower outlets in a different format, use a commercially available adapter forthe plug. Never use an electrical transformer designed for traveling, which maydamage the battery pack.Inserting the Battery Pack and Memory CardInsert the included battery pack and a memory card (sold separately).Note that before using a memory card that is new or has been formattedin another device, you should format the memory card with this camera(=71).1 Open the cover.zz Slide the cover ( ) and open it ( ).2 Insert the battery pack.zz While pressing the battery lock in thedirection of the arrow, insert the batterypack as shown and push it in until it clicksinto the locked position.3 Check your card’s write-protectswitch and insert the memory card.zz Recording is not possible on memorycards with a write-protect switch when theswitch is in the locked position. Slide theswitch to the unlocked position.zz Insert the memory card facing as shownuntil it clicks into the locked position.zz Make sure the memory card is facing theright way when you insert it. Insertingmemory cards facing the wrong way maydamage the camera.4 Close the cover.zz Lower the cover ( ) and hold it down asyou slide it, until it clicks into the closedposition ( ).zz If the cover will not close, make sure youinserted the battery pack facing the rightway in step 2.Terminals BatteryLockLabel