Canon PowerShot ELPH 180 User Manual

Also see for IXUS 175: Getting started

Contents

96Before UseBasic GuideAdvanced GuideCamera BasicsAuto ModeOther ShootingModesP ModePlayback ModeSetting MenuAccessoriesAppendixIndexCannot magnify!/Cannot rotate/Cannot modify image/Cannot modify/Unselectable image.• The following functions may be unavailable for images that were renamed or alreadyedited on a computer, or images shot with another camera. Note that starred (*)functions are not available for movies.Magnify* (=58), Rotate* (=64), Edit* (=65 – 66), Print List* (=86), andPhotobook Set-up* (=88).Exceeded selection limit• More than 998 images were selected for Print List (=86) or Photobook Set-up(=88). Choose 998 images or less.• Print List (=86) or Photobook Set-up (=88) settings could not be savedcorrectly. Reduce the number of selected images and try again.• You attempted to choose more than 500 images in Protect (=59), Erase (=62),Print List (=86), or Photobook Set-up (=88).Naming error!• The folder could not be created or images could not be recorded, because the highestsupported folder number (999) for storing images on the card has been reached andthe highest supported image number (9999) for images in folders has been reached.On the [ ] tab, change [File Numbering] to [Auto Reset] (=72), or format thememory card (=71).Lens Error• This error may occur if the lens is held while it is moving, or when the camera is usedin dusty or sandy locations.• Frequent display of this error message may indicate camera damage. In this case,contact a Canon Customer Support Help Desk.A camera error was detected (error number)• If this error message is displayed immediately after a shot, the image may not havebeen saved. Switch to Playback mode to check for the image.• Frequent display of this error message may indicate camera damage. In this case,write down the error number (Exx) and contact a Canon Customer Support HelpDesk.File Error• Correct printing (=82) may not be possible for photos from other cameras orimages that have been altered using computer software, even if the camera isconnected to the printer.Print error• Check the paper size setting (=84). If this error message is displayed when thesetting is correct, restart the printer and complete the setting on the camera again.Ink absorber full• Contact a Canon Customer Support Help Desk to request assistance with inkabsorber replacement.