42 Shooting - Letting the Camera Select Settings• You can change the following settings.- Resolution: L (Large)* / M1 (Medium 1) / M2 (Medium 2) / S (Small)- Compression: (Superfine) / (Fine)* / (Normal)- Flash: (Red-Eye Reduction Auto)* / (Auto) / (Off)- Drive Method: Single* / Self-Timer- Macro: Off* / On- Digital Zoom: Off* / On- AF Mode: Continuous* / Single- Review: Off / 2 sec* / 10 sec.- File No. Reset: Off* / On* Default settings• With the Review function, you can change the length of time images show in theLCD monitor after shooting, or set it so they do not show at all (p. 39).Checking an Image Right after ShootingChecking the ImageThe following explains ways to view the photographed image in addition toviewing it for 2 seconds in the LCD monitor when it has been opened.Keeping the Shutter Button PressedThe image will continue to display in the LCD monitor as long as you keep theshutter button fully depressed.Pressing the ButtonIf you press the button while the image is displayed in the LCD monitor, it willcontinue to display even after the shutter button is released. Press the shutterbutton halfway again to stop displaying it.• You can perform the following while images are displayed.- Erasing Images (p. 9)- Displaying Images in the Detailed Display Mode (p. 33)- Magnifying Images (p. 87)
