Read This First 7• The camera terminal of the supplied compact power cord is designed for exclusive usewith your camera. Do not use it with other products or batteries. There is a risk of fireand other hazards.• Exercise due caution when screwing on the separately sold wide converter lens, tele-converter lens, close-up lens and conversion lens adapter. If they loosen, fall off andshatter, the glass shards may cause an injury. Never aim the lenses at the sun orstrong light sources. There is a risk of damage to eyesight.Cautions• Avoid using, placing or storing the equipment in places subject to strong sunlight orhigh temperatures, such as the dashboard or trunk (boot) of a car. Exposure to intensesunlight and heat may cause the batteries to leak, overheat or explode, resulting in fire,burns or other injuries. High temperatures may also cause deformation of the casing.Ensure that there is good ventilation when using the compact power adapter to chargethe battery pack or power the camera.• Do not store the equipment in humid or dusty areas. Storage in such areas could leadto fire, electrical shock or other damage.• Be careful not to bang the camera or subject it to strong impacts or shocks that couldlead to injury or damage the equipment when wearing or holding it by the strap.• Be careful not to cover the flash with your fingers when shooting. In addition, do nottouch the surface of the flash after taking several pictures in rapid succession. Eitheraction could result in burns.• If your camera is used for prolonged periods, the camera body may become warm.Please take care when operating the camera for extended periods as your hands mayexperience a burning sensation.Preventing MalfunctionsAvoid Strong Magnetic FieldsNever place the camera in close proximity to electric motors or other equipmentgenerating strong electromagnetic fields. Exposure to strong magnetic fields may causemalfunctions or corrupt image data.Avoid Condensation Related ProblemsMoving the equipment rapidly between hot and cold temperatures may causecondensation (water droplets) to form on its external and internal surfaces. You canavoid this by placing the equipment in an airtight, resealable plastic bag and letting itadjust to temperature changes slowly before removing it from the bag.If Condensation Forms Inside the CameraStop using the camera immediately if you detect condensation. Continued use maydamage the equipment. Remove the CF card and battery or Compact Power Adapter(if connected) from the camera and wait until the moisture evaporates completelybefore resuming use.
