75Shooting – Letting the Camera Select SettingsSuper Macro ModeCompared with normal Macro mode, you can get closer to thesubject and magnify it more, when shooting. The background canalso be shot with different effects.You can shoot subjects in Super Macro mode when the distancefrom the end of the lens to the subject is in the following range: 5 to20 cm (2.0 to 7.9 in.) (wide angle end – 86 mm (35mm filmequivalent)).The resolution can only be set to M2, M3 or S. If the resolution is setto L, M1 or RAW when you set the camera to Super Macro mode,the resolution will automatically be changed to M2. (The resolutionwill return to the previous setting when you cancel Super Macromode.)Mode Dial1 Press the DISPLAY button to turn the LCD monitoron.2 Hold down the button untilappears on the LCD monitor.z The zoom position moves within therecordable area.z You can cancel the super macro mode bypressing the button again.z Be careful not to bang the lens against the subject whenshooting in Super Macro mode.z Super Macro mode does not work properly when any separatelysold lens is attached to the camera.z The digital zoom cannot be used.z Recordable areas at the minimum shooting range are as follows:z Super Macro mode can also be selected and saved in CustomModes C1 and C2.Zoom Position(35mm film equivalent) Recordable AreaWide angle end Approximately 48 x 36 mm (1.9 x 1.4 in.)86 mm Approximately 24 x 18 mm (0.9 x 0.7 in.)
