Advanced Shooting Functions 147Saving Original ImagesNot only can you save images with altered colors when shooting stillimages with the Color Accent or Color Swap modes, but you canalso choose to save the original images (before the color change).1 Select [Save Original].1. Press the button.2. Use the or button to select[Save Original] in the menu.2 Make settings.1. Use the or button to select[On] or [Off].2. Press the button.• If [On] is selected, the images willbe saved as consecutive filenumbers. The original image will be the lower file number,while the image shot in Color Accent or Color Swap mode willbe the higher file number.If [Save Original] is set to [On]- Only the image set with Color Accent or Color Swap isdisplayed on the LCD monitor during shooting.- The image displayed on the LCD monitor immediately aftershooting is the one shot with Color Accent or Color Swap.As erasing the image at this time will cause the originalimage to be erased at the same time, be careful.- As two images are saved with each shot, the number ofrecordable shots displayed on the LCD monitor will be halfthe number that is displayed when [Save Original] is set to[Off].
