52 Shooting - Letting the Camera Select SettingsMovie ModeUse this mode to shoot movie frames. The resolution is automatically fixed at 320 x240 pixels.1 Turn the mode dial to .2 Press the shutter button all the way.• Shooting and sound recording will startsimultaneously.• During the shooting, the elapsed time willshow in the display panel and a red circle willappear in the upper right of the LCD monitoror viewfinder.3 Press the shutter button all the way tostop recording the movie.• The maximum movie length is approximately30 seconds (15 frames / second). Shootingautomatically stops after 30 seconds, or whenthe internal memory or CF card becomes full.• Be careful not to touch the microphone while shooting.• The AE, AF and zoom settings are set and locked to the settings of the first frame.• If the indicator flashes green after a shoot, this indicates that the movie is beingwritten to the CF card. You cannot shoot until it stops flashing.• The digital zoom, flash, continuous mode, AEB mode, flash exposurecompensation, AE lock, FE lock, metering method, resolution, compression, fileformat (RAW), and image adjustment (ISO speed, contrast, sharpness andsaturation) settings cannot be adjusted in this mode.• Sound is recorded monaurally.• There is no shutter sound in movie mode.• QuickTime 3.0 or higher is required to replay movie files (AVI / Motion JPEG) on acomputer. QuickTime 4.1 is included on the Canon Digital Camera Solution Disk.
