Shooting - Selecting Particular Effects 69Auto Exposure Bracketing (AEB Mode)In this mode, the camera automatically changes the exposure within a set range totake three shots after you press the shutter button once. You can adjust AEBsettings in 1/3EV steps within the range of -2EV to +2EV of the standard exposuresetting. AEB settings can be combined with exposure compensation settings toextend the adjustment range.1 Press the button threetimes.• The icon and the exposure compensationbar will appear in the display panel. Theexposure compensation bar will also appear inthe LCD monitor or viewfinder if it is on.2 Press the or arrow on the omniselector to expand or contract therange.• The arrow expands the range, the arrowcontracts it.3 Press the Set button.• You can also take the picture with the setexposure compensation by pressing the shutterbutton instead.• To cancel the AEB setting, reset it to .4 Shoot the image.• If you pressed the shutter button at Step 3,the icon and the exposure compensationbar will reappear after the shot, allowing youto change the setting for the next shot.• This setting can only be selected in the , or modes.• When exposure compensation is set to , the AEB exposure sequence is0, - and + according to the camera’s exposure meter.• The AEB mode cannot be used for flash photography. If the flash fires, only oneimage gets recorded.• The setting is not cancelled when the camera is turned off (p. 79).
