Preparing the Camera 17Installing the Battery PackInstall Battery Pack NB-2L (supplied) into the camera as follows. Use a householdpower source to power the camera for extended periods (p. 19).1 Turn off the camera (p. 27, 29).• Check that the power/mode indicator is not lit.2 Slide the CF card slot/battery cover inthe direction of the arrow to open thecover.3 Hold back the battery lock in thedirection of the arrow with the cornerof the battery pack, then insert thebattery pack into the compartmentuntil it is locked.• To remove the battery pack, release the batterylock.4 Close the CF card slot/battery coverthen slide it to the original positionuntil it clicks.• Charge the battery pack before using it the first time (p. 15).• When the upper indicator on the left side of the viewfinder is flashing green, theCF card is being written to, read, erased or transmitted to. Therefore, never turnoff the camera or open the CF card slot/battery cover while this indicator isflashing green.• Remove the battery pack when the camera is not in use.Battery lockSlidthe dcovere the CF cdirectionlit.card slotn of thet/batteryarrowt/batteryarrowlit.card slotn of theard slf thee the CF ce directionSlidethe dcoverBattbatteryuntil it iemoattery pacpack intois locked.ve tck inarrow withck, thene comackck inarrow withck, thene comack,attery pacpack intois locked.ve ttery paack intolockedbatteryuntil it ismoClatuntil itremk.Batte
