Shooting - Letting the Camera Select Settings 47Using the FlashUse the flash according to the guidelines below.1 Press the button to switch betweenflash modes.• The selected flash mode appears on the LCDmonitor.2 Shoot the image.• The flash will fire if the indicator beside the viewfinder shines orange whenthe shutter button is pressed halfway.• Shooting procedures are the same as for the Auto mode (p. 44).Built-in Flash SettingsThe flash cannot be used with some shooting modes.●*●––●––––●*●●●●●*––●●●*––●●●*––●●●*–––▲●*●●*●●●●*●●●●●●*●●●●●●●●*●●●●●*●*●●●●Red-eyereduction, AutoAutoRed-eye reduction,Flash onFlash onFlash offRed-eye reduction, AutoAutoRed-eye reduction, Flash onFlash onFlash offThe flash fires automatically as required by the lighting level, and thered-eye reduction lamp fires each time the main flash firesThe flash fires automatically as required by the lighting level.The red-eye reduction lamp and the flash always fire.The flash always fires.The flash does not fire.* Default setting.● Setting selection is possible.▲ Setting can only be selected for the first image.- Setting selection is not possible.button tdes.ted flash modeto switchde appearsh betweefire.ene flashhe lightingalways fire.the lightingh always firenhe flashh betweefire.to switchde appearsbutton tdested flash modeswiappeton isrocedures arettingse useddicator besessed halfwayre the same asde the viewfforer shtoer shto mde the viewffore the viewdicator besiessed halfwayre the same asatoator bssed halfwathe same atton isrocedures arettingsbe used
