Preparing the Camera 15Charging the Battery PackRecharge Battery Pack NB-2L (supplied) with Battery Charger CB-2LT or CB-2LTE before you use thecamera for the first time and subsequently when the “Charge the battery pack” message is displayed.1 Align the edge of the battery pack withthe line on the battery charger, then slidethe battery in the direction of the arrow.2 Battery charger model names and typesvary by region.(For CB-2LT)Plug the battery charger into anelectrical outlet.(For CB-2LTE)Attach the power cord to the batterycharger and plug it into an electricaloutlet.(For CB-2LT and CB-2LTE)• The charging indicator will shine orange whilethe battery pack is charging. It will change to asteady green when the charge is complete.• After charging, unplug the battery charger andremove the battery pack from it.○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○• To protect and prolong the life of the battery pack, do not charge it for 24 hoursor longer at a time.○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○• This is a lithium ion battery pack so there is no need to completely use ordischarge it before recharging. It can be recharged at any time.• It takes approximately 80 minutes to bring a fully discharged battery pack to fullcharge (based on standard Canon testing criteria). Charge it within a temperaturerange of 5 to 40º C (32 to 104º F).• Charging times will vary according to the surrounding humidity and battery packcharge state.• You may hear a noise during charging. This is not a malfunction.Preparing the CameraCharging IndicatorCB-2LTCharging IndicatorCB-2LTEDownloaded From camera-usermanual.com
