78 Shooting - Selecting Particular EffectsAdjusting the Flash Output(Flash Exposure Compensation)You can adjust the flash output for flash photography.1 Press the button fourtimes.• The icon and the flash exposurecompensation bar appears on the LCD monitor.2 Expand or contract the range using Bor A on the multicontroller.• The flash exposure compensation can be adjusted in 1/3 steps within arange of -2EV to +2EV.3 Press .• You can also take the picture with the set flash exposure compensation valueby pressing the shutter button without pressing .• To cancel the setting, return the setting to using B or A on themulticontroller.4 Shoot the image.• If you pressed the shutter button at Step 3, the icon and the flashexposure compensation bar will reappear after the shot, allowing you tochange the setting for the next shot.○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○• This setting cannot be adjusted in the , and shooting modes. Inmode, it can only be adjusted for the first image.• The macro mode cannot be set while the flash exposure compensation barappears on the LCD monitor.○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○• The selected shooting mode will determine whether or not the flash exposurecompensation setting is cancelled when the camera is turned off (p. 90).Downloaded From camera-usermanual.com
