63Using the Mode DialYou can freely select camera settings such as the shutter speedand aperture value to suit your shooting purposes. After settingsare made, shooting procedures are the same as for “Shooting (Auto Mode)” (Basic Guide p. 11).Program AEUse the program AE mode to have the camera automatically set theshutter speed and aperture value to match the brightness of thescene.z When a correct exposure cannot be obtained, the shutter speedand aperture values are shown in red on the LCD monitor whenthe button is pressed halfway. Use the following shootingmethods to obtain the correct exposure and make them show inwhite.- Use the flash (raise the flash).- Adjust the ISO Speed.- Set the Auto ISO Shift to [On] (p. 81).Shooting in the Creative ZoneShooting Modez For information on the relation between the aperture valueand shutter speed see p. 65.z Please note that camera shake becomes a factor at lowshutter speeds and with larger aperture values. If(camera shake warning) appears in the LCD monitor (orviewfinder), try the following steps to resolve the problem.- Use the (image stabilizer) function.- Raise the ISO speed.- Set the Auto ISO Shift to [On] (p. 81).- Raise the flash to fire.- Use a tripod.Shooting Mode
