Canon PowerShot SX410 IS User Manual

Also see for PowerShot SX410 IS: User guide User guide Getting started

Contents

Canon PowerShot SX410 IS User Manual Manual pdf 34 page image

34Before UseBasic GuideAdvanced Guide1 Camera Basics2 Auto Mode3 Other Shooting Modes5 Playback Mode6 Setting Menu7 Accessories8 AppendixIndex4 P ModeCustomizing the Self-TimerStill Images MoviesYou can specify the delay (0 – 30 seconds) and number of shots (1 – 10).1 Choose [ ].● Following step 1 in “Using the Self-Timer”(= 33), choose [ ] and press the[ ] button immediately.2 Configure the setting.● Press the [ ][ ] buttons to choose[Delay] or [Shots].● Press the [ ][ ] buttons to choose avalue, and then press the [ ] button.● Once the setting is complete, [ ] isdisplayed.● Follow step 2 in “Using the Self-Timer”(= 33) to shoot.● For movies shot using the self-timer, [Delay] represents the delaybefore recording begins, but the [Shots] setting has no effect.● When you specify multiple shots, image brightness and whitebalance are determined by the first shot. More time is requiredbetween shots when the flash fires or when you have specifiedto take many shots. Shooting will stop automatically when thememory card becomes full.● When a delay longer than two seconds is specified, two secondsbefore the shot, the lamp blinking and self-timer sound will speedup. (The lamp will remain lit in case the flash fires.)● Once you start the self-timer, the lampwill blink and the camera will play a self-timer sound.● Two seconds before the shot, the blinkingand sound will speed up. (The lamp willremain lit in case the flash fires.)● To cancel shooting after you havetriggered the self-timer, press the[ ] button.● To restore the original setting, choose [ ]in step 1.Using the Self-Timer to Avoid Camera ShakeStill Images MoviesThis option delays shutter release until about two seconds after youhave pressed the shutter button. If the camera is unsteady while you arepressing the shutter button, it will not affect your shot.● Follow step 1 in “Using the Self-Timer”(= 33) and choose [ ].● Once the setting is complete, [ ] isdisplayed.● Follow step 2 in “Using the Self-Timer”(= 33) to shoot.