Canon PowerShot SX410 IS User Manual

Also see for PowerShot SX410 IS: User guide User guide Getting started

Contents

Canon PowerShot SX410 IS User Manual Manual pdf 38 page image

38Before UseBasic GuideAdvanced Guide1 Camera Basics2 Auto Mode3 Other Shooting Modes5 Playback Mode6 Setting Menu7 Accessories8 AppendixIndex4 P ModeMagnifying the Area in FocusStill Images MoviesYou can check the focus by pressing the shutter button halfway, which willenlarge the portion of the image in focus in the AF frame.1 Configure the setting.● Press the [ ] button, choose [AF-Point Zoom] on the [ ] tab, and thenchoose [On] (= 25).2 Check the focus.● Press the shutter button halfway. Theface detected as the main subject is nowmagnified.● To restore the original setting, choose[Off] in step 1.● The area in focus is not magnified in the following cases when theshutter button is pressed halfway.- If a face was not detected, if the person is too close to thecamera and their face is too large for the screen, or if thecamera detects subject movement- When digital zoom is used (= 33)- When Tracking AF is used (= 56)- When a TV is used as a display (= 87)Helpful Shooting FeaturesDisplaying Grid LinesStill Images MoviesGrid lines can be displayed on the screen for vertical and horizontalreference while shooting.● Press the [ ] button, choose [GridLines] on the [ ] tab, and then choose[On] (= 25).● Once the setting is complete, grid linesare displayed on the screen.● To restore the original setting, repeat thisprocess but choose [Off].● Grid lines are not recorded in your shots.