Canon PowerShot SX60 HS User Manual

Also see for PowerShot SX60 HS: User manual User manual User manual Connection guide Connection Setup

Contents

Canon PowerShot SX60 HS User Manual Manual pdf 20 page image

20Before UseBasic GuideAdvanced Guide1 Camera Basics2 Auto Mode /Hybrid Auto Mode3 Other Shooting Modes5 Tv, Av, M, C1, and C2 Mode6 Playback Mode7 Wi-Fi Functions8 Setting Menu9 Accessories10 AppendixIndex4 P ModeSetting the Date and TimeSet the current date and time correctly as follows if the [Date/Time] screenis displayed when you turn the camera on. Information you specify thisway is recorded in image properties when you shoot, and it is used whenyou manage images by shooting date or print images showing the date.You can also add a date stamp to shots, if you wish (= 45).1 Turn the camera on.● Press the ON/OFF button.● The [Date/Time] screen is displayed.2 Set the date and time.● Press the [ ][ ] buttons to choose anoption.● Press the [ ][ ] buttons to specify thedate and time.● When finished, press the [ ] button.3 Specify your home time zone.● Press the [ ][ ] buttons to choose yourhome time zone.4 Finish the setup process.● Press the [ ] button when finished.After a confirmation message, the settingscreen is no longer displayed.● To turn off the camera, press the ON/OFFbutton.Using the Screen● Open the screen (1) and rotate it towardthe lens 180° (2).● Close the screen in this orientation (3).● The screen can only open to approximately 175° in direction (1).Be careful not to open the screen any further than this, as it willdamage the camera.Adjusting the Screen Angle and Orientation● You can adjust the angle and orientationof the screen as needed, to suit shootingconditions.● To protect the screen when the camerais not in use, always keep it closed andfacing the camera body.● Open the screen to activate it when the camera is on. This willdeactivate the viewfinder. Similarly, close the screen (facing thecamera body) to deactivate it and activate the viewfinder.● When including yourself in shots, you can view a mirror imageof yourself by rotating the screen around toward the front of thecamera. To cancel reverse display, press the [ ] button,choose [Reverse Disp.] on the [ ] tab, and press the [ ][ ]buttons to choose [Off].(1)(2)(3)Downloaded From camera-usermanual.com Canon Manuals