Canon PowerShot SX60 HS User Manual

Also see for PowerShot SX60 HS: User manual User manual User manual Connection guide Connection Setup

Contents

Canon PowerShot SX60 HS User Manual Manual pdf 74 page image

74Before UseBasic GuideAdvanced Guide1 Camera Basics2 Auto Mode /Hybrid Auto Mode3 Other Shooting Modes5 Tv, Av, M, C1, and C2 Mode6 Playback Mode7 Wi-Fi Functions8 Setting Menu9 Accessories10 AppendixIndex4 P ModeChanging the Noise Reduction Level (High ISO NR)You can choose from 3 levels of noise reduction: [Standard], [High], [Low].This function is especially effective when shooting at high ISO speeds.● Press the [ ] button, choose [HighISO NR] on the [ ] tab, and then choosethe desired option (= 30).● Not available with [ ] or [ ] (= 89).Auto Exposure Bracketing (AEB Shooting)Still Images MoviesThree consecutive images are captured at different exposure levels(standard exposure, underexposure, and then overexposure) eachtime you shoot. You can adjust the amount of underexposure andoverexposure (relative to standard exposure) from –2 to +2 stops in1/3-stop increments.1 Choose [ ].● Press the [ ] button, choose [ ] in themenu, and then choose [ ] (= 29).● To view the automatically determined ISO speed when you haveset the ISO speed to [AUTO], press the shutter button halfway.● Although choosing a lower ISO speed may reduce imagegraininess, there may be a greater risk of subject and camerashake in some shooting conditions.● Choosing a higher ISO speed will increase shutter speed, whichmay reduce subject and camera shake and increase the flashrange. However, shots may look grainy.Adjusting ISO Auto SettingsStill Images MoviesWhen the camera is set to [AUTO], maximum ISO speed can be specifiedin a range of [400] – [3200], and sensitivity can be specified in a range ofthree levels.1 Access the setting screen.● Press the [ ] button, choose [ISOAuto Settings] on the [ ] tab, and thenpress the [ ] button (= 30).2 Configure the setting.● Choose a menu item to configure, andthen choose the desired option (= 30).● You can also access the [ISO Auto Settings] screen when theISO speed setting screen (= 73) is displayed, by pressing the[ ] button.Downloaded From camera-usermanual.com Canon Manuals