Recording Movies at Specific Shutter Speeds andAperture Values (Movie Manual Exposure)z Some shutter speeds may cause flickering on the screen whenrecording under fluorescent or LED lighting, which may be recorded.z When the ISO speed is fixed, you can compare your specified value(where the exposure level indicator moves) to the standard exposurelevel by pressing the shutter button halfway. The exposure levelindicator appears as [ ] or [ ] when the difference from standardexposure exceeds 3 stops.z You can check the ISO speed in [AUTO] mode by pressing the shutterbutton halfway. If standard exposure cannot be obtained with yourspecified shutter speed and aperture value, the exposure level indicatormoves, indicating the difference from standard exposure. The exposurelevel indicator appears as [ ] or [ ] when the difference from standardexposure exceeds 3 stops.z Shooting in Program AE (P Mode)z : Program AE; AE: Auto Exposurez If standard exposure cannot be obtained when you press the shutterbutton halfway, the shutter speed and aperture value blink in white. Inthis case, try adjusting the ISO speed or activating the flash (if subjectsare dark), which may enable standard exposure.z Movies can be recorded in mode as well, by pressing the movierecording button. However, some items on Quick Control and Menuscreens may be automatically adjusted for movie recording.z After you press the shutter button halfway, you can adjust thecombination of shutter speed and aperture value by turning thedial (Program Shift).240
