z Shooting with Servo AFz The camera may not be able to shoot while focusing, even if you pressthe shutter button all the way down. Keep holding down the shutterbutton as you follow the subject.z Exposure is not locked in Servo AF mode when you press the shutterbutton halfway but is determined the moment you shoot.z Continuous shooting with auto focus is possible by specifying Servo AF.Note that continuous shooting is slower at this time.z Depending on the distance to the subject and the subject’s speed, thecamera may not be able to achieve correct focus.z Choosing the AF Methodz Focusing may take longer or be incorrect when subjects are dark orlack contrast, or in very bright conditions.+Trackingz After you aim the camera at the subject, a white frame is displayedaround the face of the main subject as determined by the camera.z If no faces are detected when you aim the camera at people, pressingthe shutter button halfway displays green frames around other areas infocus.z With the following subjects, faces may not be detected.- Subjects that are distant or extremely close- Subjects that are dark or light- Faces in profile, at an angle, or partly hiddenz The camera may misinterpret non-human subjects as faces.z Pressing the button displays [Face select: On], and a face frame[ ] is shown around the face detected as the main subject. Pressthe button again to switch the face frame [ ] to another detectedface. Once you cycle through all detected faces, [Face select: Off] isdisplayed and Face Select is canceled.250
