Before UseBasic GuideAdvanced GuideCamera BasicsAuto Mode / HybridAuto ModeOther ShootingModesP ModeTv, Av, and M ModePlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndex80Before UseBasic GuideAdvanced GuideCamera BasicsAuto Mode / HybridAuto ModeOther ShootingModesP ModeTv, Av, and M ModePlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexFlashStill ImagesChanging the Flash ModeYou can change the flash mode to match the shooting scene. For details onthe flash range, see “Flash Range” (=190).1 Raise the flash.zz Move the <h> switch.2 Configure the setting.zz Press the <r> button, choose a flashmode (either press the <q><r> buttonsor turn the <5> dial), and then press the<m> button.zz The option you configured is nowdisplayed.• The setting screen cannot be accessed by pressing the <r> buttonwhen the flash is lowered. Move the <h> switch to raise the flash,then configure the setting.[ ] AutoFires automatically in low-light conditions.[h] OnFires for each shot.[Z] Slow SynchroFires to illuminate the main subject (such as people) while shooting at aslower shutter speed to illuminate backgrounds out of flash range.• In [Z] mode, mount the camera on a tripod or take other measuresto keep it still and prevent camera shake. Additionally, you shouldset [IS Mode] to [Off] when using a tripod or other means to securethe camera (=82).• In [Z] mode, even after the flash fires, ensure that the main subjectdoes not move until the shutter sound is finished playing.[!] OffFor shooting without the flash.• If a blinking [ ] icon is displayed when you press the shutter buttonhalfway in camera-shake inducing, low-light conditions, mount thecamera on a tripod or take other measures to keep it still.COPY
