17CoverContentsPart NamesPrint SettingsPrinting via USB CableTroubleshootingAppendixBasic OperationsMaking One Print from a Selected ImageFor a convenient way to make a single print of a selected image, followthese steps.Choose and print an image.zz Choose an image as described in steps1 – 4 of “Printing Images” (=15).zz Press the <p> button for a single printof the selected image.• A single print is not produced this way if you follow steps 4 – 5 in“Printing Images” (=15) to choose images and the numberof prints. To use this method for individual prints, make sure thenumber of prints is [0] in step 4 on =15 beforehand.Avoiding Left Over PaperNote the following to prevent wasted paper, which occurs if ink is consumedfaster than the paper.• Do not turn the sprocket too much when removing slack from the inksheet (=8).• To cancel printing in progress, always press the <v> button; afterpressing the <v> button, never turn off the power before SELPHY isfinished printing (step 6).• If a message indicates that the paper has run out, add paper withoutturning off the printer or removing the ink cassette (step 7). Otherwise,press the <v> button to cancel printing (step 6).Note that under some conditions, even if you follow these instructions, inkmay be consumed faster than the paper, leaving you with excess paper.Printing from USB Flash DrivesImages on USB flash drives (sold separately) can be printed the same wayas images on memory cards.zz Remove any inserted memory cards.zz Insert a USB flash drive as shown.zz After this, all steps are the same as forprinting images from memory cards(=15 – 16).• Some USB flash drives may be more difficult than others to insert and remove,and some may not work as expected.• For instructions, refer to the flash drive user manual.