Canon SELPHY CP1000 User Manual

Also see for SELPHY CP1000: User guide Getting started

Canon SELPHY CP1000 User Manual Manual pdf 23 page image

23CoverContentsPart NamesBasic OperationsPrinting via USB CableTroubleshootingAppendixPrint SettingsPrinting ID PhotosImages can be printed for use in photo identification. Choose from thefollowing three sizes.[Custom] Specify the length of the long and short sides, and then print.[Standard] Print a photo that complies with the international ICAO standard.[Dual] Print two sizes: 50x50 mm (approx. 2.0x2.0 in.) and 45x35 mm(approx. 1.8x1.4 in.).zz With [Custom] and [Standard], two different images can be printed oneach sheet.zz The photo may not be accepted as an official ID photo, depending onthe intended purpose. For details, contact the institution that requires thephoto.1 Specify ID photo printing.zz Press the <k> button.zz Press the <u><d> buttons to select [IDPhoto], and then press the <o> button.2 Specify the finished size of thephoto.zz Press the <l><r> buttons to specifyhow the size is determined.zz [Custom]: Press the <u><d> buttonsto select [Long Side], and then press the<l><r> buttons to specify the length.Specify the [Short Side] length, and thenpress the <o> button again. Notethat options available for [Short Side]are automatically updated based on the[Long Side] length.zz [Standard] or [Dual]: Check the indicatedimage size and press the <o> button.3 Choose an image to print.zz Press the <l><r> buttons to select animage, and then press the <u> button.is shown in the lower right (up to twoimages with [Custom] and [Standard],only one image with [Dual]).zz To specify the cropping area (=22),press the EDIT button.zz Print as described in step 6 of “PrintingImages” (=16).zz Settings are cleared after printing.