Canon SELPHY CP600 User Manual

Also see for Selphy CP600: Software guide Software guide Supplementary guide User guide Printer Software guide

Contents

Canon SELPHY CP600 User Manual Manual pdf 23 page image

21 Paper Storage OthersDo not touch paper while it is being printed. During printing, the sheet repeatedly movesback and forth along the top of the paper cassette and in and out through the paper-handlingslot. Please do not touch the sheet during this process as this could damage the printer.Do not allow too many prints to accumulate in the print output receptacle. Do not allowmore than 9 sheets to accumulate in the print output receptacle.You may write on the paper with an oil-based pen, but to avoid smudging please allowink time to dry before touching it.Allow the paper to reach room temperature before installing and using it. Condensationmay form if you suddenly move the paper from a cold location to a warm location. If there isrisk of condensation, leave the paper in its packaging until it reaches room temperature, andwipe away any moisture before loading it.Please avoid the following actions as they may result in color change, color fading orcolor bleeding.• Sticking any type of adhesive tape onto the print surface.• Allowing print surfaces to come into contact with vinyl materials.• Applying alcohol or other volatile solvents to the print surface.• Leaving print surfaces tightly pressed against any other surfaces or objects for prolongedperiods.If you wish to mount prints into an album, select an album with nylon-based sleeves,or with propylene or cellophane sleeves. Other types of sleeves may cause color loss orcolor bleeding.Color change may occur over time in accordance with conditions of storage. Canonassumes no liability for color changes.To avoid print quality deterioration, do not store your prints in the following types oflocations.• Locations that reach temperatures above 40 °C (104 °F)• Humid or dusty locations• Locations exposed to direct sunlight.Remove unused paper from the paper cassette, return it to the bag and then into itsoriginal package. Store the package horizontally.When opening a color ink/paper set (full-sized label set, label set), check the contents.If something seems to be missing or appears to be damaged, contact the dealer forassistance.The battery pack is charged while installed on the printer, and the printer is connectedto the compact power adapter supplied with the printer.When using the battery pack, if the battery status is low, the finished print may not beejected into the print output receptacle completely. If this happens, gently pull out thepaper.