Canon SELPHY CP900 User Manual

Contents

Canon SELPHY CP900 User Manual Manual pdf 51 page image

51Wireless LANO The printer's SSID (network name) is not displayed on the smartphone• Select ad hoc mode (p. 29).• Check if your smartphone supports ad hoc mode. If it does not support ad hoc mode, connect withinfrastructure mode (p. 31).• Do not use wireless LAN near a device that uses 2.4 GHz frequency band such as a microwave oven orBluetooth since it will cause radio wave interference.• Place the printer and smartphone close and do not place any object between them.O Cannot connect after changing the WEP key• After changing the WEP key in ad hoc mode (p. 29), enable the new WEP key by turning off theprinter, and then turning it on again. Then, enter the new WEP key on the smartphone.O The access point is not displayed on the listO Cannot connect in infrastructure mode• If you have many access points and the one you want to connect to is not displayed on the list, use WPSConnection (p. 34) or Manual Settings (p. 33) to connect to it.• Do not use wireless LAN near a device that uses 2.4 GHz frequency band such as a microwave oven orBluetooth since it will cause radio wave interference.• Place the printer and access point close and do not place any object between them.• Check if the encryption key is correct and try connecting again.• Check that the channel is set to one between 1 and 11 on the access point. It is recommended tomanually fix the channel between 1 and 11 rather than leaving it to automatically select the number.Refer to the user guide supplied with your access point for information on how to check and change thesettings.• If you are using a MAC address filter or IP filter on your access point, register the printer information youchecked in [Confirm Settings] (p. 41) to the access point. In such a case, disable the privacy separatorfunction. Refer to the user guide supplied with your access point for information on how to modify andcheck the settings.• Set the IP address manually (p. 41) if you are using WEP security on your network and not using DHCP.O Cannot connect to SELPHY• Turn SELPHY’s power off, and then turn it on again. If a connection still cannot be established, check thesettings of the access point or device that you are trying to connect wirelessly.O Printing takes time, or wireless connection is disconnected• Do not use wireless LAN near a device that uses 2.4 GHz frequency band such as a microwave oven orBluetooth since it will cause radio wave interference.Note that images may take a long time to send even when [ ] is displayed.• Place the printer and smartphone close and do not place any object between them in ad hoc mode.• Place the printer and access point close and do not place any object between them in infrastructuremode.Error MessagesIf a problem occurs with SELPHY, a message appears on the screen. If a possible solution displays withthe error message, follow the on-screen instructions. If you have an error message only, check items in"Troubleshooting" (p. 49).If these items do not solve your problem, contact a Canon Customer Support Help Desk.O If a problem occurs while SELPHY is connected to a digital camera, an error message may appear for you tocheck on the screen of the digital camera.COPY